Canon MG3650 Printer Manual UK

The Canon MG3650 is an all-in-one inkjet printer designed for home and small office use in the UK market. It features print, scan, and copy functions, wireless connectivity, automatic duplex printing, and compatibility with Canon's FINE cartridge system. Below are key sections covering setup, features, operation, maintenance, and troubleshooting specific to UK voltage (230V) and support channels.

Features at a Glance

Key components: Printer unit, Power cable, Setup CD-ROM, Quick Start Guide, Ink cartridges (PGI-570 & CLI-571).

Unpacking and Installation

Unpack and inspect contents. Place on a stable, level surface away from direct sunlight and heat sources.

1. Remove all packaging tape and protective materials from the printer.
2. Install ink cartridges: Open cover, insert cartridges into respective slots until they click.
3. Load paper: Adjust rear paper guide, insert up to 100 sheets of plain A4 paper.
4. Connect power: Plug the power cable into the printer and a UK mains socket (230V).
5. Power on: Press the POWER button; the printer will initialise.

WARNING! Do not touch the print head or ink cartridge contacts. Keep the printer horizontal during installation.

First-Time Setup

Power on the printer; follow on-screen prompts from your computer or mobile device.

1. Install software: Insert the Setup CD-ROM or download drivers from the Canon UK website.
2. Connect via USB or Wi-Fi: For wireless setup, press the Wi-Fi button and follow the wizard.
3. Align print head: Run the print head alignment utility from the printer software.
4. Test print: Print a test page to verify installation.

CAUTION! Ensure the printer is connected to a stable power source; avoid using extension cords if possible.

Specifications

• Model: Canon PIXMA MG3650.
• Print Resolution: Up to 4800 x 1200 dpi.
• Print Speed (A4): Approx. 9.9 ipm (black), 5.7 ipm (colour).
• Scan Resolution: Up to 1200 x 2400 dpi.
• Copy Speed: Approx. 2.9 ipm (black), 1.5 ipm (colour).
• Ink Cartridges: PGI-570 (Black), CLI-571 (Colour: Cyan, Magenta, Yellow).
• Paper Sizes: A4, A5, B5, Letter, Legal, envelopes, photo papers.
• Power Consumption: Approx. 10W (operation), 0.3W (standby).
• Dimensions (W x D x H): 449 x 304 x 152 mm.
• Weight: Approx. 5.5 kg.

Controls and Indicators

Front Panel: POWER button, Wi-Fi button, LED indicators (Power, Alarm, Wi-Fi).

LED Status: Steady green = Ready; Blinking green = Processing; Orange = Error/Attention required.

Software Controls: Access via Canon Printer Utility (Windows/macOS) or Canon PRINT app (mobile). Functions: Print settings, Scan, Copy, Maintenance (cleaning, alignment), Network settings.

Connecting to Devices

USB: Direct connection to computer. Wi-Fi: Connect to your home/office network for wireless printing from multiple devices.

1. Turn on the printer and ensure Wi-Fi is enabled on your router.
2. Press and hold the Wi-Fi button on the printer until the LED flashes.
3. On your computer or mobile device, select the printer network (SSID) and enter the password if prompted.
4. Alternatively, use WPS (Wi-Fi Protected Setup) if supported by your router.

Tip: For best wireless performance, place the printer within range of your router and avoid physical obstructions.

Printing and Scanning

Supports documents, photos, envelopes, and labels.

1. Printing: Select 'Print' from your application, choose the MG3650 as the printer, adjust settings (paper type, quality, duplex), and click Print.
2. Scanning: Place document on the glass platen or in the Automatic Document Feeder (if equipped), open Canon scanning software, select scan type, and start.
3. Copying: Place document on platen, press the Copy button in the software or use the mobile app to set copies and quality.
4. Photo Printing: Use genuine Canon photo paper for best results; select 'Photo Printing' mode in software.

WARNING! Do not touch the scanner glass with fingers; use a soft cloth for cleaning. Ensure paper is free of staples or clips.

Ink Cartridge Management

Ink Level Monitoring: Check via printer software or Canon PRINT app. Replace cartridges when low or empty.

1. Open the printer cover; the print head carrier moves to the replacement position.
2. Press the cartridge latch to release the empty cartridge; remove it.
3. Unpack the new cartridge, remove the protective tape, and insert it firmly until it clicks.
4. Close the cover; the printer will perform an ink charging process.

Note: Use only genuine Canon PGI-570 and CLI-571 cartridges for optimal performance and to avoid damage.

Care & Maintenance

Unplug the printer before cleaning. Exterior: Use a dry, soft cloth. Interior: Remove paper dust and debris with a soft brush.

Print Head Cleaning: If print quality declines (streaks, missing lines), run the print head cleaning utility from the maintenance tab in the printer software.

CAUTION! Do not use alcohol, solvents, or abrasive cleaners. Keep liquids away from the printer.

Regulatory Information (UK)

CE Mark: Complies with European directives. Waste Electrical and Electronic Equipment (WEEE): Do not dispose of with household waste; recycle according to UK regulations. RoHS: Complies with Restriction of Hazardous Substances. For UK support, visit www.canon.co.uk/support or contact Canon UK Customer Service at 0800 086 8826. Copyright © Canon UK Ltd. All rights reserved.

Troubleshooting

Reset: Unplug the printer for 60 seconds, then restart. For network reset, hold the Wi-Fi button for 10 seconds.

Service (UK): 0800 086 8826; www.canon.co.uk/support